Tuesday, September 25, 2012

Connective Tissue: Finding the Beauty in Disconnection

The inspiration for this brief post came quite randomly while searching for connective tissue images online.  I came across this puzzle image with the very profound "finding the beauty in disconnection"  title associated with it...then a small floodgate opened.

One of the most overlooked and under-appreciated tissues in the human organism is connective tissue. When you consider the implications of the connective tissue newtwork, this oversight goes "beyond wrong".  When you actually perform a paradoxical "step back and zoom" into fascia / connective tissue as it relates to both mechanics and systemic function...you can't help but be amazed, startled, or otherwise fascinated.  Although I can go into many different discussions on many different levels, I will focus on 2 very straight-forward, yet fundamental, functional appearances of connective tissue in the human body (as per Van der Waal).  Before I do this, I will share a very insightful image that effectively demonstrates the extent of the connective tissue "web" of influence:

I have already shared this image on the One Giant Leap Facebook page, but it most certainly is worthy of another appearance.  The image is self-explanatory and illustrates how connective tissue is more than important, rather an essential and vital contributor to mechanical and systemic competence.

Finding the Beauty in Disconnection:
The term "connective" tissue generates an obvious and intuitive thought in almost everyone's mind:  it is a specialized and differentiated tissue that connects muscle to bone, bone to bone, and organs to the lining of the internal wall.  The paradoxical reality is that the second architectural appearance of connective tissue has the functional role of disconnection!  To be precise, the intramuscular and extramuscular connective tissue is engineered to allow for proper gliding and sliding between adjacent muscles and muscle bundles (Hyaluronan).  It is also very prevalent in articular cartilage allowing for proper movement and protection against compressive forces. 

When you consider this paradoxical "duality", in addition to the mechanical and systemic contributions illustrated above, the relative "importance" of connective tissue within the living organism becomes quite astounding.  More importantly, when rehabilitative strategies are formulated, connective tissue should be considered as a primary focal point as a means to improvement and restoration of structural and systemic homeostasis.

This perspective goes hand-in-hand with interstitial fluid which will be part of a larger discussion in the very near future...and in combination, they encompass the entire spectrum of rehabilitative success.

Although brief and "reader-friendly", I hope it was educational and insightful!
Cheers!


Monday, September 24, 2012

Hip Subluxation and Cerebral Palsy

I have made a somewhat delibrate decision to stay away from potential "hot topic" discussions, however the issue of hip subluxation remains the top "talking point" in the overwhelming majority of the discussions I have with parents of children with Cerebral Palsy (CP). 

It is with this fact in mind that I will attempt to instill what I feel to be a fundamental understanding of the larger perspective of this greatly debated (and largely misunderstood) issue.  As always, the intention is simply to expand the panoramic and give some insight so that parents and extended families can more efficiently filter out the "noise" of information that floods their daily lives...and enable some clarity when making important decisions.

Diagnostics:  The very term "diagnosis" seems to somehow generate some relief and/or sense of progress...however, a diagnosis as such only serves to classify the particular symptomatic manifestations. The reality is that the challenge still exists.  With respect to hip subluxation, the actual "diagnosis" is unfortunately dependant on a relatively primitive device:  the x-ray.  Although the term "primitive" may be taken as somewhat controversial, it none-the-less reflects a very real and undeniable truth.  I will expand on my rationale in an effort to frame this particular philosophy with more clarity.

1)  X-Rays are 2-Dimensional
This is perhaps the most alarming reality to me...the fact that an assessment of a dynamic, 3-dimensional organism is being performed with a static, 2-dimensional image.  To be more precise, the human organism exists in 3-dimensional space and within a specific gravitational field.  Therefore, to look at it in 2-dimensional space with little or no gravitational forces placed on it seems somewhat primitive and certainly limits it's representation of the true reality.  

2) "Looking at the room through the keyhole"
I absolutely love this analogy...and for those who know me, you have heard me use it quite often.  The x-ray (in addition to the static / 2-dimensional limitations) is only representative of a very small area of the body.  This would be analogous to giving an estimate of a large conference room by looking through the keyhole of the door.  The unconscious assumption is that everything beyond the scope of the x-ray is fine...and in most cases, the pelvis (which is even INSIDE the x-ray image) is completely overlooked....and even worse, disregarded completely.  This is dangerously naive (if I may speak frankly) and further "waters down" the diagnostic reliability.

3) Bones and the diagnostic "monopoly".
The x-ray itself perpetuates the idea of the bones as the singular determinant of functional performance.  The reality is that without the soft-tissue contribution, the bones would simply clatter to the ground into a large pile of useless struts.  The human organism is a complex marvel of engineering that is charatcerized by biotensegrity.  Biotensegrity is essentially a term to describe the architecture of complex systems.  These systems are characteristed by BOTH tensional and compressional elements.  The bones are the compressional contribution to the system, while the soft tissue (muscles, tendons, connective tissue, fascia, etc...) contribute to the tensional component.  Therefore, given the obvious variables that contribute to functional performance, why have the bones been given such a diagnostic monopoly?  

Architectural Realities:
The reality with CP children (despite the diagnosis) is that they reliably demonstrate profound joint weakness.  Even in the mildest cases (Level 1 GMFCS), it is quite easy to demonstrate the significant soft-tissue / fascial weakness that exists.  The hypotonic individual demonstrates this in the most obvious way...however the spastic CP child can challenge this understanding.  The excessive muscular tension in essense "masks" the joint weakness behind an artificial shield of tight muscle.  However, in both cases there can be a reliable expectation of some level of joint weakness.  

Protocol / Procedural Flaws:
Given all of the realities mentioned above, perhaps the most glaring flaw is in the actual performance of the x-ray itself.  I am not making any direct comment on the people performing the x-rays, rather on the age-old paradigm of the "proper x-ray protocol" that has been formulated within a very narrow perspective and framework.  

The typical procedure plays out as follows...DESPITE the architectural / structural manifestations of the child, they are placed on their back, one person holds them down to the table with force from the top of the body to prevent any movement.  Then...another person actively grasps the ankles, PULLS the legs straight, TWISTS the legs into internal rotation, and holds them in place.  Although I was always aware of this protocol, it never actually "clicked" until I had an x-ray done on my 6 month old daughter.  Even in the case of a healthy child, the mere act of applying stress to forcibly move a child from their neutral position in an effort to acquire the "proper position" was (in all truth) absurd.  This was obviously uncomfortable and traumatic for such a young child, but when you compound the biomechanical distortions of a CP child into this framework...the result, at best, is highly unreliable.  

Fact #1:  The CP child demonstrates profound muscular imbalance, irregular muscle activation, and asymmetry...therefore the "straight" position is obviously one that is derived.

Fact #2:   A flat examination table is completely inadequate at enabling complete relaxation for a CPchild.  The proprioceptive feedback in a CP individual is significantly distorted, therefore a flat surface generates a great deal of sensory "confusion" and can, at times, trigger an exaggerated reaction.  Even in ourselves (healthy individuals), the first few seconds of lying on a flat surface requires some adjustment...imagine the challenegs within a CP child.

Fact #3:  This is perhaps the most important concept to remember and evaluate for yourself:  If all of the joints are weak...if one end of the body is being held down...and the other end is being held down at the ankles / lower leg...the only area available to manifest movement is the hip joint.  In other words, the inevitable muscular contraction and activation (whether it is voluntary or involuntary) will "exit" through the most proximal (closest) open chain...the hip joint.  Therefore, head of the femur will actively move within the acetabulum and, depending on when the image is actually taken, you may get vastly different images.

Final Question:
Although up until this point, I may be delivering a focused "condemnation" of the entire propcedure, but this would be a relatively narrow perspective.  I do not question whether they have a role in the effective and efficient formulation of competent diagniostics...I question the relative weight x-rays are assigned.  The implications of a "Hip Subluxation" diagnosis are enormous...therefore common sense only dictates that the diagnostic process by very exacting and comprehensive.  Therefore, the final question remains:  can the x-ray effectively confirm hip subluxation with an acceptable level of reliabilty?  The answer only comes through the prism of each specifc families value system...however, the above mentioned realities should have at least been given consideration.

The True "Subluxation" Test:
The relative implications of hip alignment become more prominent when there is significant amounts of load-bearing (weight-bearing) involved...therefore when children are non-weight bearing, then alignment can even be considered as secondary.  However, a very simple "litmus test" can be implemented when this issue is brought up:

1.   Is he/she in pain?
2.  Are they weight-bearing?
3.  Is the muscular mass within the leg decreasing?
4.  Is range of motion reduced/reducing?
5.  Is functional competence reducing?

If the answer to all of these questions is "NO"...then the subjective image of the x-ray is completely secondary.  The reality is that a hip that is subluxed will manifest in reduced range of motion, depletion of the muscular mass of the entire leg, reduced functional performance, and often times manifest pain or discomfort.  These are the real signs of a hip in a deteriorating condition. 

In all fairness, the x-ray can be included as a 6th consideration within the subluxation test simply because it can provide some useful information that contributes to the overall 3-dimensional reality...but as the only source of information from which potentially drastic decisions are made, it fails due to it's primitivity.

I hope this has been somewhat helpful and insightful...and more importantly, given some clarity to an already confusing situation.  I think it merits repeating that my true intention is merely to open different levels and perspectives...not to convince or persuade...rather to provide an amplified understanding so that the chosen path is determined with more conviction and confidence as well as with an overall sense of well-being.

Cheers!

Friday, September 7, 2012

Cerebral Palsy Guidebook: Developmental versus Chronological

For those who know me well, this discussion will be a familiar one.  It had taken quite awhile to find an effective way to create a mindset that would, not only resonate and increase understanding, but also facilitate more effective learning and understanding with respect to the journey taken by CP individuals and their immediate and extended families.  I refer to the term "journey" because it most accurately describes the life-long path which is sometimes relatively smooth, sometimes filled with obstacles, and almost always evolving.  Because the "finish line" is never predictable, it is the journey that defines success...therefore it is only logical to make every attempt to instill the proper perspective and overall frame of mind that will ultimately sustain you throughout.  Although there are many different "angles" and ways to approach this topic, I have found that when there is a fundamental understanding of developmental age versus chronological age, the mindset is automatically "re-booted" into a different "mental software". 

Mental Software: DOS 2.2 to Windows 7
I use this familiar comparison in an attempt to illustrate the relative "leap" in perspective...in many ways, it can be considered a mini-paradigm shift.  Throughout human society, there has always been an underlying understanding / expectation with respect to human behaviour.  To be more precise, behaviour is almost always assessed against the "age appropriate litmus".  Behaviour is defined as either appropriate or inappropriate based on that persons age.  Without going into any complex sociological rant, this is no different within the sphere of Cerebral Palsy.  Moreover, it is equally as rampant in the professional medical mindset as it is within the general population.  In some ways, this is to be expected...we all see life through the same relative prism, therefore why wouldn't this apply to an individual with CP?  This is where the "re-install" of the mental software needs to take place.

The proper perspective is not something that is (or has ever been) elusive...in fact, it has been under our noses from the beginning.  Alarmingly enough, we have seen and read it over and over again...and never truly latched onto it.  To be more specific, we only need to refer to the definition itself to get a better understanding of the CP journey.  Cerebral Palsy can be considered as a condition that falls under the umbrella of neurodevelopmental delay (NDD).  This is a relatively large umbrella that includes West Syndrome, Miller-Diekers Syndrome, etc...therefore this perspective has implications far beyond CP as well.  By definition, neurodevelopmental delay is a condition that is characterized by the absence or delay of natural developmental milestones.  It is also defined as the persistence of primitive reactions and the absence of postural reactions.  To put this all into very straightforward terms: In the CP individual developmental age does not correspond with chronological age.

Mental Software: User Tutorial
Now that this perspective has been installed, it will require some basic orientation and familiarization.  The reality in the vast majoriy of cases is that children are "evaluated" based on their chronoligical age and the corresponding developmental achievement.  For example, a CP child of 2 years old is typically assigned strategies and tools that are intended to achieve the essential functional goal of "walking".  However the fundamental reality is that the developmental age of the pelvis, hips, knees, and feet are likely much "younger" and therefore unprepared for any load-bearing activities.  This is a simple example, of course, but it speaks to a very complex problem.  Let me illustrate an even more precise example:  Up until the age of 10-14 months, there is a tremendous amount of developmental milestones that take place...development of head control, increased strength and stability in the shoulder girdle, stability in a seated position, crawling, standing, etc...  These are all developmental stages that every human must pass through in order to achieve proper functional competence.  In a healthy child, all of these (and more) are achieved by 10-14 months.  In addition, the primitive reactions (Moro Reflex, Landau Reflex, etc...) have all disappeared by the 8-9th month and have been replaced by postural reactions such as lateral propping and counterbalancing. In the CP individual, these primitive reactions persist long after 14 months of age...and can even be seen into their teens. 

Therefore, the use of chronological age as a template for functional competence / expectation or to assess other important concerns such as bone density...is fundamentally flawed and fundamentally incorrect.  The realistic "litmus" standard should always refer to developmental age rather than chronological age.  If primtive reactions (Moro, Landau) are still present, no matter what their chronological age, the individual's developmental age corresponds to that of a child of 0-14 months.  

There is no debating the internal conflict that exists when a parent is asked to consider their 4, 5, 6 year old as an infant...however the architectural reality and developmental competence is precisely that.  If there is an implied understanding of the definition of neurodevelopmental delay...why does this understanding fail to reach beyond the words on the page?   The developmental age of the individual defines the appropriate therapeutic intervention best suited for the progress of the child.  Although this may be quite a leap in perspective, the fortunate reality is that this concept makes assessing progress much easier.  The gradual disappearance of primitive reactions and the progressive development of postural reactions signal progression through the developmental process.  What is almost ALWAYS overlooked is that functional competence is the spontaneous reaction to a maturing structure!  In a healthy individual there is no need to "train" the muscles or "train" the brain to achieve functional maturity...it is spontaneous.

Power Down:
Although it may take some time for this perspective to truly integrate, I hope that it at least stimulates some "error messages" popping up when you come to important decisions regarding rehabilitative strategy.  I wrote a few posts on Primitive and Postural Reactions which served as a follow up to a basic post on fundamentals of proper perspective that will contribute to the internalization of this important concept.  I hope it proves insightful and, more importantly, helpful.

Cheers!


Saturday, September 1, 2012

Helical Tensegrity as a Structural Mechanism in Human Anatomy

 

 HELICAL TENSEGRITY AS A STRUCTURAL MECHANISM IN HUMAN ANATOMY
International Journal of Osteopathic Medicine 2011;14:24-32. 
Graham Scarr
ABSTRACT
Tensegrity is a structural system popularly recognised for its distinct compression elements that appear to float within a tensioned network. It is an attractive proposition in living organisms because such structures maintain their energy-efficient configuration even during changes in shape. Previous research has detailed the cellular cytoskeleton in terms of tensegrity, being a semi-autonomous system amenable to such analysis because of its size. It has also been described at higher levels in the extracellular/fascial matrix and musculoskeletal system, but there are fewer syntheses of this.

At a fundamental level, the helix and tensegrity share common origins in the geometries of the platonic solids, with inherent hierarchical potential that is typical of biological structures. The helix provides an energy-efficient solution to close-packing in molecular biology, a common motif in protein construction, and a readily observable pattern at many size levels throughout the body. The helix and tensegrity are described in a variety of anatomical structures, suggesting their importance to structural biology and manual therapy.

1. INTRODUCTION
The world of biology is full of weird and wonderful shapes, some with no obvious purpose, and others that suggest some hidden meaning. Even human anatomy has its fair share of the bizarre in the shapes of bones and limbs. How and why does each one develop its characteristic form, and how does that relate to function? Is there more to shape than genetics and Wolffs’ Law?
Three thousand years ago, the Greeks believed that just five archetypal forms could describe everything in the universe, because they were pure and perfect, and part of natural law. Recent research reinstates these physical laws as a major determinant of biological complexity in the sub-cellular realms, and significant to structures at higher scales.1-4
Tensegrity (tension-integrity) is a structural mechanism that potentially integrates anatomy from the molecular level to the entire body, and is popularly recognised for its distinct compression elements that appear to float within a tensioned network. It is a most attractive proposition in living systems, because such structures automatically assume a position of stable equilibrium, with a configuration that minimizes their stored elastic energy. Tensegrity structures allow movement, with the minimum of energy expenditure, without losing stiffness or stability.1,5-7
This contrasts with the orthodox view that explains the musculo-skeletal system through classical Newtonian mechanics, using pillars, arches and fixed-fulcrum levers to counteract the force of gravity. In this approach, bones stack on top of one another like a pile of bricks, restrained by soft tissues that permit movement in a local piece-meal like way.8 Comparisons of tensegrity and biological structures show them both to have non-linear visco-elastic properties, with fluid-like movements that result from integration of all components in the system.1,5,6,9

The molecular helix provides an energy-efficient solution to close-packing in biology and also displays tensegrity properties. It is a common motif in protein construction, and a readily observable pattern at many size levels throughout the body. It is proposed that helical tensegrity is a key mechanism in structural biology and consequently has significance for manual therapies.

2. THE HELIX
The helix is like a coiled spring, or put mathematically, “A spiral curve lying on a cone or cylinder, and cutting the generators at a constant angle” (Walker, 1991).10,11 In biology, it can be appreciated as a regular stacking of discrete components, such as the nucleotides and bases in DNA, or the steps in a spiral staircase.
Globular proteins, often containing multiple helical domains, can themselves polymerize into helixes (fig. 1a,b).12 Similar helixes can wind around each other to form coiled-coils (Fig. 1c),13 and assemble into mechanically rigid rods or filaments, or further combine into more complex structures with specialized functions (fig. 2).
In collagen type I, repeating sequences of amino acids spontaneously form a left-handed helix of procollagen, with three of these helixes combining to form a right-handed helix of tropocollagen. Five tropocollagen molecules then coil in a staggered helical array,14 which lengthens longitudinally by the addition of more tropocollagen to form a microfibril, with higher arrangements forming fibrils, fibres and fascicles.15 Collagen appears at several different hierarchical levels within bones, tendons, ligaments and fascia (fig. 2).

2.1 Structural hierarchies
Hierarchies link structures at multiple levels and are widespread in living organisms. They provide an efficient mechanism for packing in 3-D16 by using components that are made from smaller components, with each made from smaller still, often repeating in a fractal-like manner (fig. 2).1,5,17 Hierarchies enable mechanical forces to be transferred down to a smaller scale with the dissipation of potentially damaging stresses.18-21At atomic and molecular levels, the basic forces of attraction and repulsion automatically balance those stresses in the most energetically efficient configuration.12,22-24

2.2 Helical tubes
The tubular nature of the helix scales up into blood vessels,25 the urinary system and intestinal tract.26,27 Carey (1920) observed left and right-handed helical patterns in the epithelium during formation of the oesophagus and trachea, respectively, in the early embryo.28 In the walls of elastic arteries, such as the aorta, helical collagen reinforcement resists high loads from the pressure of blood. The middle layer organizes into lamellar units, with the orientation of collagen fibres and smooth muscle cells forming a continuous helix. Collagen is more dispersed in the outer adventitia, but still forms two helical groups of fibres.25
Within the spine, the intervertebral disc contains collagen arranged in concentric lamellae, with opposing orientations in alternate helical layers of 65o (axial).29 The inner lamellae of the annulus fibrosus consist of collagen type II fibres, cross-linked to type IX on the fibre surface, within a highly hydrated proteoglycan matrix; gradually changing to collagen type I fibres in the outer lamellae.30,31 The higher proteoglycan/water content in the inner lamellae acts as a thick-walled pressure vessel containing the nucleus pulposus, while the higher concentration of collagen type I in the outer lamellae provides tensile reinforcement during bending and torsion.29,32

Pressurized tubes cause circumferential and longitudinal stresses in the tube wall that are typically contained by collagen under tension within a helix. Clarke and Cowey (1958) showed that an optimum fibre angle of ~55o (axial) balances both these stresses, with a reduced angle resisting tube elongation, and a higher angle resisting circumferential and volume increases.33,34 Such helical fibre arrays allow pressurized tubes to bend smoothly without kinking, and resist torsional deformation;32 collagen has itself been described as a tube.35
Cardiac muscle fibre orientation varies linearly between inner and outer walls, from 55o (axial) in one direction to 55o in the opposite, with tangential spiralling in a transverse plane.36 The entire heart has also been described as a helical coil of muscle with contractions that cause clockwise and anti-clockwise twisting motions.37 This typically produces a left ventricular ejection fraction of 60%, for a muscular contraction of just 15%,38 confirming the mechanical efficiency of a helix.

2.3 Tubes within tubes
Traditionally considered as mere packing tissue, fascia has been shown to exert considerable influence over muscle generated force transmission.39-42 It naturally develops into compartments, or ‘tubes within tubes’, particularly noticeable in cross-sections of the limbs. Within muscle, a delicate network of endomysium surrounds individual muscle fibres and is continuous with the perimysium ensheathing groups of fibres in parallel bundles, or fasciculi. Perimysial septa are themselves inward extensions of the epimysium that covers the muscle and is continuous with the fascia investing whole muscle groups. All these sheaths (tubes) coalesce and transmit the force generated within muscle fibres through tendons and inter/extra-muscular fascial attachments.39,42 These fascial tissues are all reinforced by two helical crossed-ply sets of collagen,36 with the ‘ideal’ resting fibre orientation of 55o (axial)33 that varies with changing muscle length.
Tubular organs that maintain constant volume throughout changes in shape, due to crossed-helical arrangements of muscle and fascial tissue, have been described in the tongues of mammals and lizards, the arms and tentacles of cephalopods, and the trunks of elephants.43 Helical winding and its functional significance have also been described in the body walls of worms;33 squid;44 amphibians;45 eels;46 fish and dolphins;47 suggesting that a similar helical arrangement is likely to occur throughout the human. However, although the thoraco-lumbar and abdominal muscle/fasciae appear to be partial spirals, information on the fibre orientation of other fascial compartments is incomplete.
Stecco (2004) described helical fascial sheaths that transfer tensional forces within and between themselves, and control movement in a way that the nervous system is incapable of.48 Anecdotally, palpatory phenomena with a helical component are observed within the soft tissues of the extremities.49 A normal pattern exhibits right-handed helical motion in the limbs on the left side, and left-handed helical motion on the right, although current anatomical knowledge is unable to explain this.
The helix has long been recognized in joint motion,8 and its widespread appearance at multiple size-scales throughout the body suggests that it has some special significance. At a fundamental level, the helix and tensegrity are linked through a common origin in the geometries of the platonic solids.1,4,50

SIMPLE GEOMETRY
3.1 The platonic solids, geodesic geometry and close-packing
The platonic solids are regular polyhedra distinguished by having faces that are all the same shape, and naturally form through the efficiencies of geodesic geometry (the connection of points over the shortest path) and principles of symmetry.1,4,50 In two-dimensions, objects of similar size close-pack and form stable triangular configurations (fig. 3a). Adding another sphere to each triangle creates a tetrahedron, and the addition of more spheres allows the octahedron and cube to emerge (fig. 3b-c), because of the same packing arrangement. These platonic shapes are generally only found as fixed inorganic crystals, but there are many consequences of close-packing.
The icosahedron differs from the other platonic shapes by packing spheres around a nuclear space to form the geodesic dome (Fig. 3d).50 It is also triangulated and has multiple symmetries which allow it to stack in a column or helix and form more complex patterns and shapes.1,2 Some naturally occurring structures based on the icosahedron are carbon fullerenes; pollen grains and ‘spherical’ viruses.22-24
Both the tetrahedron and icosahedron spontaneously form through the interactions of natural physical forces, and are the basis for appreciating complex shapes in human anatomy.2,4,51 

3.2 Chirality and Equivalence
The property of chirality is intrinsic to the helix, and the platonic solids demonstrate this as they polymerize into left and right-handed helixes (fig. 4).51-54 At a basic level, four spheres close-pack to form a tetrahedron, the shape that occupies the smallest proportion of unit space; minimum volume within maximum surface area.50 The addition of more spheres as in the lattice packing of figures 3b & 3c, alters that proportion because of the squares within the octahedron, but a tetrahelix comes closer to the optimum, making it a more suitable model for molecular packing because of this margin of energy-efficiency (fig. 4a).51,53,54 A tetrahelix also displays inherent hierarchy within its sub-helixes of different pitch (fig. 5).
Mapping a tetrahelix onto a plane surface, by ‘unzipping’ one of its long helical edges, displays the packing efficiency of a triangular pattern (fig. 3a). Rolling that map into a cylinder demonstrates equivalence, where each component is in the same relative position to all the others.53,54 Equi-valence implies that components are arranged symmetrically, and the only shapes that can accommodate it have surfaces based on the platonic solids and cylinders.22-24,55,56 Because molecules in a peptide sequence are unlikely to match the points on a geometric lattice precisely, evolution has evaded this constraint through the device of ‘quasi-equivalence’, where component proteins contort slightly but still relate to the geometric template.1,23,24,53
Tropocollagen (fig. 2) has been described as three stretched quasi-tetrahelixes surrounding a central core.53,54 Each glycine residue, from the three procollagen peptides, contributes a hydrogen atom that forms the corner of a regular tetrahedron, and together they form the right-handed tetrahelical core of the tropocollagen molecule. The left-handed procollagens are the sub-helixes shown in figure 5b; and this configuration also gives rise to a stack of slightly contorted icosahedra.53,54 Most (if not all) molecular helixes are geometrically related to the tetrahelix and icosahedron,12,22,53,54,56 including the alpha-helix of DNA, which has been described as a [triple stranded] tetrahelix with one strand missing.53

Molecules automatically assume a state of minimal-energy as they balance the attraction and repulsion of their constituent atoms. As the helix is a more efficient close-packing configuration it is understandable that it should be such a common structural shape.  At a larger scale, the bacterial cell wall contains actin homologues arranged as a structural helix determining cell shape and elongation.57,58 Plants display similar configurations in their cell walls59 and geometric patterns at a higher level.

3.3 Fibonacci and the Golden Mean
The number of elements within each opposing spiral is nearly always two consecutive numbers of the Fibonacci sequence, where each new term is the sum of the two preceding ones (1,1,2,3,5,8,13,21,34…). The ratio of any two consecutive numbers approximates to the Golden Mean (1.61804), and becomes closer as the sequence gets higher. The helical pattern on the side of a pineapple, arrangement of branches on a plant stem61 and position of coronary artery lesions62 relate to the same sequence. The Golden Mean often appears in the proportions of biological structures and platonic solids,63 including the icosahedron, which is the model that takes us into the tensegrity of macro-anatomy.50

4 TENSEGRITY
Descriptions of tensegrity in biology have appeared in the literature since the early 1980’s,64,65 and include the cellular cytoskeleton;5 developing neurites66 and cerebral cortex;67 spider silk6,68 and wasp arcus;69 mammalian70-72 and avian lung;73 fascial matrix;74-76 shoulder;75 spine;51 pelvis77 and cranium.78
Fuller (1975) described a tensegrity structure as a set of struts under compression, and an arrangement of cables under isometric tension, that always balances in the most energetically efficient configuration.50 It is geodesic by its very nature, because tension always acts in straight lines, and automatically reduces itself to a minimum. Tensegrity structures make possible an infinite variety of stable shapes through changes in the lengths of their compression members, and changes in those shapes that require very little control energy. As each component influences all the others, stresses distribute throughout the system, creating a structure that can react to external forces from any direction without collapsing.6,7,51 An organism utilizing such a system would be able to move with the minimum of energy expenditure without losing stiffness or stability.6,7,51 Because tension and compressional forces are separated, the material properties of components can be optimized, and in biological systems this typically occurs through hierarchies. Tensegrity hierarchies achieve a significant reduction in mass,6,7 and provide a functional connection at every level, from the simplest to the most complex, with the entire system acting as a unit.5,51,76

4.1 The tensegrity helix
The icosahedron is a fundamental geometric shape because it encloses a greater volume, within minimum surface area, than any regular structure apart from a sphere (fig. 6a). It is developed into a tensegrity structure by using six compression struts to traverse the inside (fig. 6b). These connect and hold opposite vertices apart with the outer edges of the icosahedron now replaced by cables under tension. The resultant pull of the cables is balanced by the struts, which remain distinct from each other and do not touch. They provide structural integrity so that the compression elements float within the tension network.50,79

Considering the six struts in different groups of three, joined on the surface by ‘tension triangles’ (fig. 6c), shows that each strut within the group is oriented at 90o to the others, and together they create a chiral twist. On the other side of the structure is a similar group with a twist in the opposite direction, which means that a tensegrity icosahedron already contains helical precursors of both chiralities.
When three struts are modelled on their own (Fig.7), they form a shape called a tensegrity prism.6,7 Increasing the number of struts causes their centres to position more towards the outside of the structure, enlarging the central space and eventually forming a cylindrical ‘wall’ due to the changing orientation (fig. 7b-d). The struts are equivalent, and all form part of an infinite series of left or right-handed helixes; the model in figure 8 demonstrates their tubular nature. Each strut could be made from a smaller helix, or the whole structure become part of a strut within a larger helix ie it has hierarchical capability. Helical molecules are at the ‘lower’ end of structural hierarchies that fill the entire body, but have physical properties that continue into those higher levels. Helical tensegrity is a structural mechanism with many properties useful to organic life.

5 THE HELICAL-TENSEGRITY BODY
Helical molecules behave as tensegrity structures in their own right, as they stabilize through a balance between the forces of attraction (tension) and repulsion (compression).79,80They readily combine into more complex structures that retain some of the same properties.2,12

The cellular cytoskeleton is described as a multi-functional tensegrity structure that influences cell shape, and activates multiple intra-cellular signalling pathways.5 Helical microfilaments of actin and microtubules of tubulin are the tension and compression elements, respectively (fig. 1a,b); while spectrin fibres and actin bundles may have similar roles within the cell cortex (Figs. 1c).81,82Tensioned intermediate filaments link everything together, from the nucleus to the cell membrane.83

Tension is generated through the action of actomyosin motors and polymerization of microtubules, and any change in force at one part of the structure causes the cytoskeleton to alter overall cell shape.5 Many enzymes and substrates are situated on the cytoskeletal lattice, and changes in its configuration alter their activity, leading to a switch between different functional states such as growth, differentiation or apoptosis.5
The cytoskeleton connects to the matrix and other cells through transmembrane proteins, such as integrins and cadherins, respectively. These create a mechanical coupling that transfers tension, generated within the cytoskeleton, to the matrix and adjacent cells. A prestressed state of isometric tension thus exists between them, so that a change in matrix tension causes a realignment of structures within the cytoplasm, and a change in cell function. This reciprocal transfer of mechanical forces is likely to orchestrate cellular growth and expansion, allowing the emergence of complex multi-cellular tissue patterns, based on the same principles.5,84,85

5.1 Helical tubes
The formation of capillaries results from tension-dependent interactions between endothelial cells and an extra-cellular scaffold of their own construction, and is described through tensegrity.86 The growing matrix causes changes in the configuration of cytoskeletal components,5 and initiates chemical signalling cascades that influence further development of the capillary network.87
The capacity for fluid flow through a tube depends, in part, on the porosity of the tube wall. The helical tensegrity ‘wall’ in figure 8 has many gaps, but if the struts were expanded into plates that just touched each other, they could be made to ‘seal’ the internal space. This compares with the selective barrier of endothelial cells that allows vascular contents to pass out between capillary walls. The internal cellular cytoskeleton determines cell shape and orientation, through tensegrity;5 is affected by signalling mechanisms and variations in fluid flow; and alters the tension between cells through adherens junctions,88 ultimately affecting tube permeability.89,90
In tensegrity terms, there is no specific need for a compressional element within the tube wall if this is provided by outward pushing radial pressure, although arterial walls are pre-stressed even when load free. It is likely that wall components under tension are linked to other structures under compression at different hierarchical levels; Fuller (1975) emphasized that tension and compression must always coexist.50 Collagen type I fibrils are the predominant tensors, and are virtually inextensible under tension (<5%);30 but the mechanical properties of more than twenty other types are poorly understood. Proteoglycans and glycosaminoglycans tend to increase in tissues under compression. Combining these and other components into tissue specific matrices contributes to huge histological variation. Confirmation that they are tensegrity configurations, however, will depend on analysis of their physical interactions.

A fundamental principle of tensegrity is that the forces of tension and compression are separated into different components, and always act in straight lines; which means that there are no shear stresses or bending moments. The model in figure 8 shows curved struts that seem contrary to this, but they can be understood in terms of hierarchies.  Curved struts only remain stable if their crystal/molecular structures are strong enough to resist the potentially damaging shear stresses that lead to buckling; or they are part of a tensegrity hierarchy that eliminates those stresses by its very nature. Curves may appear at one level within a tensegrity hierarchy, but when looked at in more detail, have structural components that handle tension and compression in straight lines.

Undoubtedly, the fibre angle within any particular tissue depends on the functional context. The model in figure 8 shows struts arranged in a self-similar array and tension cables with differing orientations. Previous descriptions of “random” collagen orientations may have misinterpreted what were actually functionally ordered tensegrity alignments,91 and the sensitivity of newer imaging techniques and their analysis may resolve this.92,93

5.2 Helixes within helixes
Axial compression of a tensegrity helix initiates rotation in a direction dependent on the helical angle and strut orientation (chirality), with a corresponding decrease in the central diameter. Axial extension causes it to expand demonstrating a negative Poisson ratio; most man-made materials reduce their width when stretched,9,16 but this unusual response is common in biological structures.1,51 Surrounding a helix with another one of opposite chirality increases resistance to axial compression, as each helical layer counteracts the rotation of the other; crossed helixes have been shown to alter tubular properties.33,34
The intervertebral disc contains collagen arranged in concentric lamellae, with opposing orientations in alternate helical layers that provide tensile reinforcement.29 Whether this is a tensegrity configuration is yet to be assessed; but the widespread view that discs provide resistance to spinal compression as a prime function is probably too simplistic, and the whole spine has been looked at from a tensegrity perspective.51 Although disc failure usually occurs in tension,94 this is usually due to abnormal loading.
The negative Poisson ratio may also have relevance to the helical dynamics of the heart and has been described with the tensegrity ‘jitterbug’ mechanism. When any two tension triangles of a tensegrity ‘icosahedron’ are pushed together or pulled apart (Fig. 6c), the entire structure contracts and expands, respectively. 1,50,51,95

5.3 PUTTING THIS ALL TOGETHER
51,74,76 Helical ‘tubes within tubes’ mean that fascial compartments of the trunk and limbs can be considered in the same way. Objections that fascia is too flexible to contain compression struts can be overcome by considering the diameter of muscle, and its increase during contraction, as such struts. This would undoubtedly alter the tension pattern of surrounding fascia, which has itself been shown to influence the force appearing at tendons.39,40 In a tensegrity sense, fascia is the bodies main component of tension suspended between bones under compression, with smaller compartments taking origin from larger ones. Muscle fibres can then be considered as mere motors.
Helical and tensegrity structural systems complement each other, and are based on the fundamental properties of the tetrahedron and icosahedron. A chain of tensegrity icosahedra simply contains the crossed-helical fibres of a tube. Putting all this together from a helical-tensegrity perspective necessitates a reappraisal of structural biology and manual therapeutic techniques in terms of fundamental geometry.

6 CONCLUSION
The observation of a geometric pattern doesn’t necessarily imply anything meaningful, as Johannes Kepler (1571-1630) found out with his early description of a platonic solar system. However, the simple tetrahedron, octahedron, cube and hexagon are recognised in the structures of inorganic crystals, a result of atomic close-packing and principles of symmetry. (fig. 3b,c).1,4,50 Carbon fullerenes and viruses appear as icosahedra and are related to the geodesic geometry of a sphere(fig. 3d).1,2,23 The hexagonal packing of muscle fibrils and cells occurs because of the same physical laws.4,5,65 There are many possible consequences of close-packing, and the tetrahelix as one of them provides a more energy-efficient solution in molecular biology (fig. 5).53,54

Molecules assemble spontaneously and automatically balance the attraction and repulsion of their constituent atoms in a state of minimal-energy.24,79 The helix forms because of the same ‘platonic’ rules, those of organic chemistry and the dynamic nature of biological systems. The tetrahelix and its geometry then describe the helical hierarchies of protein structures and DNA.

Concurrent with the molecular helix is the principle of tensegrity. Tension and compression (attraction and repulsion); geodesic geometry and minimal-energy; and the inherent ability to form hierarchies are characteristics of both these structures. At the cellular level, the tensegrity principle describes the mechanical behaviour of the cytoskeleton, being a semi-autonomous system amenable to such analysis because of its size.5 As a structural mechanism, tensegrity depends on the integration of every part, and it has been proposed that this includes the whole body from molecules, cells, extra-cellular and fascial matrix to the entire musculo-skeletal system.1,4,5,74-76 Although it has been described at higher levels of anatomy, detailed multi-scale syntheses of its components are few. The helix, however, is a readily observable pattern at many different levels and may be inseparable from tensegrity, but there is a caveat.

If the structure of the human body is considered as a vast hierarchy of interacting sub-tensegrities, structurally and functionally, the examination of any part in isolation can be misleading, as it is inevitably incomplete.39-41 The possibilities for enquiry become virtually endless and make it unlikely that ‘bio-tensegrity’51 could ever be proved. However, if it describes biological systems more thoroughly, it is only a matter of time before this becomes the standard approach to biomechanics.

Human anatomy and physiology have been described in terms of tensegrity, and the volume of supporting evidence is steadily increasing. The helix is a well-known structural motif in biology. The fundamental links between tensegrity, the helix and platonic solids support a comprehensive view of human anatomy that is best appreciated as a complex interaction of natural physical forces.